Is your "Check Engine Light" on? An illuminated "Malfunction Indicator Lamp" (or MIL ) means a fault has been detected in the engine control system and one or more "diagnostic trouble codes" (DTCs) are stored in the engine's computer. Depending on the nature of the fault, the lamp may come on and go off, remain on continuously or flash. Some types of intermittent faults will make the lamp come on only while the fault is occurring. When the fault goes away, the lamp goes off. Other types of problems will turn the light on, and it will remain on until the fault is diagnosed and repaired.

The Check Engine lamp has proven to be a great annoyance to many motorists (as well as professional technicians) because it seems to have a mind of its own. For one thing, it doesn't tell you anything about the nature of the problem or what the trouble code might be. It could be something serious - or it might not. There is no way to know without performing a diagnostic test on the system. Consequently, you don't know if you should stop immediately or ignore the light and keep driving. If no other warning lights are on, and the engine seems to be running normally (no unusual noises, smells, vibrations, etc.), it is probably safe to assume the problem is minor and won't hinder your ability to continue driving. But sooner or later, you should have the cause of the light investigated.

DTC CODES P001 to P0099
DTC CODES P0100 to P0199
DTC CODES P0200 to P0299
DTC CODES P0300 to P0399
DTC CODES P0400 to P0499
DTC CODES P0500 to P0599
DTC CODES P0600 to P0699
DTC CODES P0700 to P0799